Samsung KM24A User Manual page 41

2nd 3rd
Eco Solution Power Saving Mode
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
Temperature Control
Change PIN
Description
Reduce the power consumption by adjusting the screen brightness.
• Screen Lamp Schedule
Enable or disable the lamp schedule.
• Schedule1, Schedule2
– Time
The panel brightness will change to the brightness set in Lamp at a specified time.
– Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
Save power by turning the product off when no signal is received from any source.
" This function may not be supported depending on the model.
" This function does not operate if the display is in the standby mode.
" The product will automatically power off at a specified time. The time can be changed as required.
Choose how long the display will wait before turning off after no user interaction is detected.
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77 °C.
The recommended operating temperature for this product is 75 to 80 °C.
" The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
continues to rise, the product will power off to prevent overheating.
" This function may not be supported depending on the model.
Change your 4-digit Personal Identification Number (PIN).
Choose any 4 digits for your PIN and enter it in Enter a new PIN.. Reenter the same 4 digits in Enter the PIN again..
The product has memorized your new PIN.
" The default PIN number is "0-0-0-0".
" Change the PIN to keep your device secure.
41