Samsung KM24A User Manual page 42

2nd 3rd
Security
Safety Lock On
Remote Management
Secured Protocol
Server Security Status
Network Lock
Certificate Manager
Wired 802.1x Connection
Description
" Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the
" Change the PIN to keep your device secure.
Turn Safety Lock On on or off. Safety Lock On
PIN must be entered to turn Safety Lock On
You can Allow or Deny external commands to access your product via a network.
Secure the protocol between this device and other devices.
• SNMP Settings
Set up your ID and password for the SNMP connection.
" This function may not be supported depending on the model.
Displays the information of the MagicInfo server.
" You can use this function when the product is connected to the MagicInfo or RM server.
Block external network access. You can register networks on the server to allow access.
Manage the certificates installed on this device.
" Limited supports for Enterprise WPA2 (TLS/TTLS/PEAP) certified models only.
" This function may not be supported depending on the model.
• Install Certificate
Connect a USB flash drive that contains certificates to install them on this device.
• Certificate List
View and manage the certificates installed on this device.
Enable this option to connect to a wired 802.1x network.
Change PIN function.
restricts the actions that can be carried out by the remote control. The correct
off.
42