Polaris RZR 200 EFI 2021 Owner's Manual page 99

q
The fill plug can be accessed
on the right side of the
transmission gearcase. The drain
e
plug is located on the bottom of
the transmission gearcase.
Access the drain plug from the
bottom of the vehicle.
To change the transmission fluid,
do the following:
1. Remove the fill plug
sealing washer
2. Place a drain pan under the
transmission drain plug.
3. Remove drain plug
sealing washer
bottom of the gearcase and
allow lubricant to drain
completely.
4. Clean the drain plug magnetic
surface.
5. Reinstall the drain plug and sealing washer. Torque to specification.
6. Add the recommended amount of lubricant or fill-to-spill through the fill plug
hole.
7. Reinstall the fill plug and washer. Torque to specification.
8. Check for leaks. Dispose of used lubricant properly.
q
and
w
.
e
and
r
from the
TORQUE
Transmission Drain Plug:
18 ft-lbs (25 N·m)
FLUID CAPACITY
Transmission Lubricant Capacity:
25 oz (750 mL)
TORQUE
Transmission Fill Plug:
18 ft-lbs (25 N·m)
MAINTENANCE
97