Polaris RZR 200 EFI 2021 Owner's Manual page 107

SPARK ARRESTOR
Failure to heed the following warnings while servicing the spark arrestor could
• Do not perform service on the spark arrestor while the system is hot. Allow
components to cool sufficiently before proceeding.
• Wear eye protection and gloves.
• Never operate without the spark arrestor.
• Never run the engine in an enclosed area. Exhaust contains poisonous
carbon monoxide gas.
To remove accumulated carbon, clean the spark arrestor at the intervals
recommended in the Maintenance Schedule beginning on page 87.
1. Remove the 3 fasteners
remove the arrestor
of the muffler.
2. Use a non-synthetic brush to clean
the arrestor screen. A synthetic
brush may melt if components are
warm. If necessary, blow debris from
the screen with compressed air.
3. Inspect the screen for wear and
damage. Replace the arrestor if
damage is found.
4. Reinstall the arrestor.
5. Torque the fasteners to specification.
WARNING
result in serious injury or death.
q
and
w
from the end
TORQUE
Spark Arrestor Fasteners:
35 in-lbs (4 N·m)
MAINTENANCE
105