Polaris RZR 200 EFI 2021 Owner's Manual page 105

1. Shift the transmission to neutral. Set the parking brake.
2. Start the engine. Apply varying throttle for 10-15 seconds to expel the
moisture and air-dry the belt and clutches.
Do not hold the throttle pedal wide open for more than 5 seconds.
3. Allow the engine RPM to return to idle, then shift the transmission into gear.
4. Test the CVT system for belt slippage. If the belt slips, repeat the process or
remove the outer clutch cover to inspect the CVT system.
If the vehicle has ingested a large amount of water into the CVT system and
has not been operated for a period of time, be sure to check the CVT system
NOTICE
NOTICE
components for water damage.
MAINTENANCE
103