Polaris RZR 200 EFI 2021 Owner's Manual page 127

TRAILERING THE VEHICLE
LOADING AND UNLOADING
The weight distribution of the cargo loaded onto the trailer is important and will
have an impact on how the vehicle handles on the road. Ensure the weight of
the cargo is distributed properly and the trailer is not rear, front, or side heavy.
Always use a spotter if you are uncomfortable loading the vehicle on your own.
A wheel chock or marker can also be used as an indication of how close you will
park the vehicle from the front of the trailer.
When loading or unloading a vehicle onto a trailer, always wear the appropriate
MINIMUM WORKING LOAD LIMIT
Always secure cargo properly. Improperly securing a load can result in severe
Securing devices, such as tie-down straps, are manufactured to support a load
that can be applied during normal service. This is known as the Working Load
Limit (WLL).
VEHICLE TYPE
All Vehicles
TRANSPORTING THE VEHICLE
Cargo and other loose vehicle parts may fly off while transporting this vehicle.
Secure or remove all cargo, and inspect the unit for loose parts prior to
If transporting the vehicle in a non-enclosed trailer, then the vehicle must FACE
FORWARD, or roof, if equipped, must be removed.
Failure to comply may allow airflow, vibration, or other factors to separate the
roof from the vehicle and cause an accident, resulting in serious personal
Follow these procedures when transporting the vehicle.
safety gear, including an approved helmet.
injury or death.
injury or death.
WARNING
WARNING
TIE-DOWN MINIMUM WLL
3,300 lb (1497 kg)
WARNING
transport.
MAINTENANCE
125