Polaris RZR 200 EFI 2021 Owner's Manual page 118

MAINTENANCE
6. If hub nut was removed, install a new cotter pin
tightened. If the holes do not line up, turn the hub nut until the cotter pin can
be installed.
7. Install the hub cap
LIGHTS
DAYTIME RUNNING LIGHT REPLACEMENT
To remove the headlight, do the following:
1. Disconnect the headlight to harness connection
2. Remove the three fasteners
3. Remove the headlight from the inside of the front bumper.
116
y
.
w
retaining the headlight.
t
after the hub nut has been
q
.