Polaris RZR 200 EFI 2021 Owner's Manual page 103

MAINTENANCE
SPARK PLUG
SPARK PLUG REMOVAL AND REPLACEMENT
WARNING
A hot exhaust system and engine can cause burns. Wear protective gloves
when removing a spark plug for inspection.
q
1. Remove the spark plug cap .
2. Using the spark plug wrench provided in the tool kit, remove the plug by
rotating it counter-clockwise.
3. Reverse the procedure for spark plug installation. Torque to specification.
SPARK PLUG GAP/TORQUE
Electrode Gap New Plug Torque Used Plug Torque
11 ft-lbs 18 ft-lbs
(0.6-0.7 mm)
(15 N·m) (24 N·m)
NOTICE
Spark plug condition is indicative of engine operation. The spark plug firing end
condition should be read after the engine is warmed up and the vehicle is
driven at higher speeds. Immediately check the spark plug for correct color.
101