Table of Contents
Advertisement
Figure 30. Complete the Virtual Linear Pump Setup.
16. Press the Stop key to complete
the setup.
17. Click Exit to save settings (Exit
becomes available at
zero Hz).
Figure 31. Run the Motor/Pump in the Direct Mode.
18. Press the ESC key until
reaching the Frequency
Command screen.
19. From the Frequency Command
screen press ESC, scroll to the
Control field, and select Direct
Mode if using no feedback (if
using feedback go to
pg.
20. While in the Local mode, press
Run.
21. While running, adjust
parameters F500 and F501
to stabilize operation if
unstable.
60
Step 22. on
61).
Press ESC
GX9 ASD Quick Start Guide
Advertisement
Table of Contents
