Bosch rexroth CytroForce-M Operating Manual page 64

Servo-hydraulic actuator
Table of Contents

Advertisement

Servo-hydraulic actuator
64 / 85
Maintenance and inspection schedule
Maintenance indication by application software
The following parameters are continuously monitored by the application soft-
ware PFC:
Table 6: Monitoring by application software
What?
Checking the operating temperature
Checking the accumulator pressure
Checking the filter element (for clog-
ging)
Inspection/testing in case of repeated "warning or error messages"
Table 7: Inspection/testing in case of repeated "warning or error messages"
What?
Checking the gas pressure of the
accumulator
Replacing the filter element
Taking oil samples, topping up oil
For maintenance and repair work we offer a comprehensive selection of service
tools (e.g. maintenance kit for servo-hydraulic actuators). If required, contact
Bosch Rexroth Service.
The "maintenance kit for servo-hydraulic actuators (SY-SHA)" assumes the task
of refilling the hydraulic fluid taken for samples. It is not intended for carrying
out complete hydraulic fluid changes or for complete bleeding of the servo-
hydraulic actuator. Beachten Sie die Operating instructions " Maintenance kit
for servo-hydraulic actuators SY-SHA), R. 62249-B, see also ⮫ Chapter 1.2
"Required and supplementary documentation" on page 5.
Bosch Rexroth AG
Inspect the servo-hydraulic actuator continuously for abnormalities and
changes. This refers, amongst others, to leakage, changed noise emission,
loose fittings/connections, unusual generation of heat, damage to cables,
etc.
In order to prevent electrostatic charging, remove dust accumulations with
a damp cloth.
An extended visual inspection includes checking the mounting elements and
fittings for tight seat. This must be carried out when the system has been
switched off, depressurized and has cooled down.
Remarks
Continuous monitoring by application
software If these "warning and error
messages" appear repeatedly, please
contact Bosch Rexroth Service.
Remarks
Maintenance work my only be carried
out by Bosch Rexroth or authorized
qualified personnel, see
⮫ Chapter 2.4 "Qualification of per-
sonnel" on page 12.
RE62270-B, 01.21

Advertisement

Table of Contents
loading

Table of Contents