Qeedji DMB 400 User Manual page 64

2
The PowerPoint presentation slideshow is now running on the media players.
U ser interactivity
The user interactivity with key pressed is supported as soon as the PowerPoint presentation is played on the media player.
If the CEC is activated on your screen, and the CEC passthrough properly supported:
Press on the
RIGHT ARROW
Press on the
LEFT ARROW
Note: some screen may require to select again the video input so that the CEC works properly.
If not, you can plug an USB keyboard:
Press on the
RIGHT ARROW
Press on the
LEFT ARROW
Enter the slide number (for example: the number 4) then press
Gekkota 4 allows to display/undisplay automatically the test card when pressing the key combination:
◬
, in less than 10 seconds and could lead to unexpected along the presentation. To inactivate this feature, set the user
ARROW RIGHT ARROW
preference
innes.player.mire.key-event.*.authorized
Screen standb y
To program a screen standby task with recurrency, for example from 8.00 PM to 7.00 AM the day after, use the device
further information, refer to the chapter §
key of the screen remote control to go to the next slide,
key of the screen remote control to go to the previous slide,
key of the USB keyboard to go to the next slide,
key of the USB keyboard to go to the previous slide,
to false.
Configuration > Task.
1
to go ahead to a specific slide no.
ENTER
64
, ,
LEFT ARROW RIGHT ARROW LEFT
feature. For
Power Manager