Operating Instructions - Frigidaire FHTC103WA1 Use & Care Manual

NOTE
The following instructions represent the
touch pad. The same instructions can be
used for the remote control.
TO TURN UNIT ON:
DO THIS:
PRESS ON/OFF BUTTON
YOU WILL SEE:
NOTE: The unit will run in Cool mode with
Eco feature and Auto fan speed setting
when used for the first time. With the Eco
feature, when the room temperature is below
the set temperature, the fan will continue to
run for 3 minutes after the compressor shuts
o . The fan then cycles on for 2 minutes at 10
minute intervals until the room temperature
is above the set temperature, at which time
the compressor turns back on. Eco feature
can be activated or deactivated by pressing
Eco button, but it is invalid in fan only mode.
AUTO FEATURE:
DO THIS:
PRESS MODE BUTTON
CHOOSE AUTO

OPERATING INSTRUCTIONS

YOU WILL SEE:
Note: This mode is a fixed combination of
Cool mode and Auto fan speed setting. In
this mode, the fan speed can not be selected
manually.
COOL FEATURE:
YOU WILL SEE:
Note: In this mode, the fan remains on all the
time with the compressor cycling on and o
when room temperature is reached.
TO CHANGE TEMPERATURE SETTlNG:
DO THIS:
PRESS MODE BUTTON
CHOOSE COOL
DO THIS:
PRESS TO RAISE
PRESS TO LOWER
9