Table of Contents
Advertisement
10
OPERATING INSTRUCTIONS
YOU WILL SEE:
Note: Tap or hold either up ( ) or down ( )
button until the desired temperature is seen
on the display. This temperature will be
automatically maintained anywhere between
62 °F (17 °C) and 86 °F (30 °C). If you want
the display to read the actual room
temperature. See "To Operate on Fan Only"
section.
TO ADJUST FAN SPEEDS:
PRESS TO SELECT
YOU WILL SEE:
Note: The fan speed can be selected among
four settings: Auto, Lo(Low), Med(Medium)
and Hi(High), unless the unit runs in "Auto"
or "Dry" mode, or the Sleep feature is
activated.
DO THIS:
TO USE AUTO FAN FEATURE:
PRESS FAN BUTTON,
CHOOSE AUTO
YOU WILL SEE:
Note: Fan starts at Low Speed and adjusts
to a proper speed according to the room
temperature dictates. For example, if the
room doesn't get too warm, it will stay at
the slowest speed. If the room temperature
rises quickly, such as a door being opened, it
will automatically go to the highest speed.
The fan speeds will re-adjust back to the
slowest speed as the room returns to the
original set temperature.
TO OPERATE ON FAN ONLY:
PRESS MODE BUTTON
CHOOSE FAN ONLY
DO THIS:
DO THIS:
Advertisement
Table of Contents
