Table of Contents
Advertisement
Operating Instructions
TO CHANGE TEMPERATURE SETTlNG:
Note: Tap or hold either up (
be automatically maintained anywhere between 16 °C (60 °F) and 32 °C (90 °F) for cooling mode. The temperature will be auto-
matically maintained anywhere between 13 °C (55 °F) and 27 °C (80 °F) for heating mode. If you want the display to read the
actual room temperature. See "To Operate on Fan Only" section on this page.
TO ADJUST FAN SPEEDS:
TO USE AUTO FAN FEATURE:
Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example, if the room doesn't
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will auto-
matically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set
temperature. Press either the fan slower or fan faster button to adjust the fan speed manually. This function is deactivated in the
heating mode on 115V models.
TO OPERATE ON FAN ONLY:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models.
(Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can
choose any fan speed you prefer. (Except "Auto Fan").
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. Fan Only
cannot be selected when the unit is in the "Remote Sensing" mode. (on those units with that feature).
2009 Electrolux Home Products, Inc.
DO THIS:
PRESS
TO RAISE
PRESS
TO LOWER
) or down (
) button until the desired temperature is seen on the display. This temperature will
DO THIS:
PRESS TO SELECT
DO THIS:
PRESS FAN
BUTTON
SELECT AUTO
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Operating Instructions
YOU WILL SEE:
YOU WILL SEE:
YOU WILL SEE:
YOU WILL SEE:
All rights reserved.
5
Advertisement
Table of Contents
