Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trotec TAC ECO II
Summary of Contents for Trotec TAC ECO II
- Page 1 TAC ECO II ORIGINAL INSTRUCTIONS HIGH-PERFORMANCE AIR PURIFIER...
-
Page 2: Table Of Contents
Information marked with this symbol helps you to carry user maintenance shall not be made by children out your tasks quickly and safely. without supervision. Follow the manual Information marked with this symbol indicates that the instructions must be observed. high-performance air purifier TAC ECO II... - Page 3 Children of less than 3 years should be kept away from operation. Order a new power cable with mains plug from the device unless continuously supervised. Trotec and replace the defective power cable with mains Children aged from 3 years and less than 8 years shall plug with the new one.
-
Page 4: Information About The Device
In combination with the integrated G4 Z line prefilter system, the Hold onto the mains plug while pulling the power cable Trotec H14 HEPA filter guarantees to separate airborne germs, out of the mains socket. viruses and dust, bacteria, spores or micro fibres from paper or Warning textiles. -
Page 5: Transport And Storage
• Before restarting the device, check the condition of the power cable. If there are doubts as to the sound condition, contact the customer service. • Have the device checked once a year by an electrically skilled person at any rate. high-performance air purifier TAC ECO II... -
Page 6: Assembly And Installation
• Make sure that extension cables are completely unrolled. • When positioning the device, keep a sufficient distance to heat sources. • Make sure that no curtains or other objects interfere with the air flow. high-performance air purifier TAC ECO II... -
Page 7: Available Accessories
1. Press the on/off button (9) to switch the device off. 2. Remove the mains plug from the mains socket. 3. Clean the device according to the Maintenance chapter. 4. Store the device according to the Storage chapter. high-performance air purifier TAC ECO II... -
Page 8: Errors And Faults
• From the outside, check the device for dirt (see chapter Maintenance). If the inside of the device is dirty, have it cleaned by a specialist company or by Trotec. The device still does not operate correctly after these checks: Please contact the customer service. - Page 9 11. Date: ........12. Date: ........Signature: ........ Signature: ......... Signature: ......... Signature: ......... 13. Date: ......... 14. Date: ........15. Date: ........16. Date: ........Signature: ........ Signature: ......... Signature: ......... Signature: ......... high-performance air purifier TAC ECO II...
- Page 10 Clean the housing with a soft, damp and lint-free cloth. Make sure that no moisture enters the housing. Protect electrical components from moisture. Do not use any aggressive cleaning agents such as cleaning sprays, solvents, alcohol-based or abrasive cleaners to dampen the cloth. high-performance air purifier TAC ECO II...
- Page 11 8. Install a new HEPA air filter. 9. Put the discharge hood (1) back on the device. 10. Fasten the discharge hood in place using the screws and the hold-down devices. 11. Put the protective caps back on the screws. high-performance air purifier TAC ECO II...
- Page 12 3. Insert the new air filter into the device. ð Observe the installation direction. The black fleece must be on the outside. 4. Put the air inlet (6) back on the device and tighten the screws on both insides of the device. III. high-performance air purifier TAC ECO II...
-
Page 13: Technical Annex
Minimum distance to walls and other objects: top (A): 10 cm rear (B): 10 cm sides (C): 50 cm front (D): - cm Weight 76.1 kg *Sound pressure level according to ISO 11203 in dB(A), depending on configuration (sound protection caps, FlowExtender Silence+) high-performance air purifier TAC ECO II... - Page 14 Circuit diagram high-performance air purifier TAC ECO II...
- Page 15 Insulation top part (T0001358) Hexagon nut (DIN 934 M5 VZ, galv.) Sheet metal cover (sheet metal cover heating mantle) Cylinder Allen screw (DIN 912 M4x10 VZ, galv.) Discharge hood (T0001209) Serrated lock washer (Ø5.3 x Ø10 x 0.6) high-performance air purifier TAC ECO II...
- Page 16 Screw (Liko cross, DIN7380-1 M4x8 VA stainl. steel) End stop (ZES 35/2 BG (beige), screwless) Screw (Liko cross, DIN7985 M5x6 VA stainl. steel) Differential pressure switch (DDW/H40 50Pa-500Pa) Washer (DIN 125 – A Ø5.3xØ10x1 VA stainl. steel) high-performance air purifier TAC ECO II...
- Page 17 Spare part Spare part Hood (T0000737) Velcro dot (self-adhesive, Ø13 black) Hexagon screw (DIN 933 M10x25 VZ, galv.) Protective fleece (495x495x8mm RT-150W, black) Detent-edged washer (Ø10.2 x Ø22.3 x 2.5 VZ, galv.) high-performance air purifier TAC ECO II...
- Page 18 Allen screw (Liko DIN7380-1 M5x12 VZ, galv., black) Support plate (T0000553) Washer (DIN 125 – A Ø5.3xØ10x1 VZ, galv.) Closure plug (retaining bolt M5) Insulation lower part (T0001364) Hexagon nut (DIN 934 M5 VZ, galv.) Self-adhesive needle felt (20x1mm L=1500mm) high-performance air purifier TAC ECO II...
- Page 19 Wheel (plain bearing wheel Ø200/50, wheel solid rubber grey, Screw (Liko cross, DIN7985 M8x16 VZ, galv. black) 80kg) Saddle feet (Ø20-22, length 29mm, width 25.5mm pin Ø5.7, Cylinder Allen screw (DIN 912 M5x10 VZ, galv.) black) high-performance air purifier TAC ECO II...
- Page 20 Upper housing (T0000746) Self-adhesive needle felt (25x1mm L=1160mm) Cover for maintenance work (T0000711) Allen screw (Liko DIN7380-1 M6x12 VZ, galv., black) Self-adhesive needle felt (20x1mm L=1950mm) Detent-edged washer (Ø6 x Ø12.2 x 1.2 VZ, galv.) high-performance air purifier TAC ECO II...
- Page 21 Spare part Spare part Fan (fan TAC V+) Protective grid (bolt circle 206.6 or 226.6mm hole 5.4mm, black plastic) Hexagon screw (DIN 933 M10x25 VZ, galv.) high-performance air purifier TAC ECO II...
- Page 22 Knurled nut (M4 black Ø20x9.5mm) Locking sleeve (snap lock lower part M5) Cylinder Allen screw (DIN 912 M4x12 VZ, galv.) Self-adhesive needle felt (25x1mm L=2920mm) Cylinder Allen screw (DIN 912 M5x10 VZ, galv.) Self-adhesive needle felt (20x1mm L=500mm) high-performance air purifier TAC ECO II...
- Page 23 Spare part Spare part Insulation top part (T0001357) Insulation top part (T0001362) Insulation top part (T0001359) Insulation top part (T0001356) Insulation top part (T0001360) high-performance air purifier TAC ECO II...
- Page 24 The position numbers of the spare parts differ from those describing the positions of the components mentioned in these instructions. Spare part Spare part Insulation (T0001366) Bottom insulation (T0000880) Insulation (T0001368) Insulation (T0000878) Insulation (T0001370) high-performance air purifier TAC ECO II...
-
Page 25: Disposal
The icon with the crossed-out waste bin on waste electrical or electronic equipment stipulates that this equipment We – Trotec GmbH – declare in sole responsibility that the must not be disposed of with the household waste at the end of product designated below was developed, constructed and its life. - Page 26 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the TAC ECO II and is the answer not in the manual?
Questions and answers