Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec TAC ECO
Summary of Contents for Trotec TAC ECO
- Page 1 TAC ECO ORIGINAL INSTRUCTIONS HIGH-PERFORMANCE AIR PURIFIER...
-
Page 2: Table Of Contents
Information marked with this symbol helps you to carry without supervision. out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the instructions must be observed. high-performance air purifier TAC ECO... - Page 3 The device may only be used in the commercial sector and in Hold onto the mains plug while doing so. the industry. • Switch the device off and disconnect the power cable from the mains socket when the device is not in use. high-performance air purifier TAC ECO...
-
Page 4: Information About The Device
In combination with the integrated G4 Z line prefilter system, the Trotec H14 HEPA filter guarantees to separate airborne germs, viruses and dust, bacteria, spores or micro fibres from paper or textiles. -
Page 5: Transport And Storage
• Before restarting the device, check the condition of the power cable. If there are doubts as to the sound condition, contact the customer service. • Have the device checked once a year by an electrically skilled person at any rate. high-performance air purifier TAC ECO... -
Page 6: Assembly And Installation
• Position the device on even and stable and ground in a way to prevent it from tipping over. • When setting up the device, ensure a sufficient distance for air inlet and outlet as well as for operation (see Technical data). high-performance air purifier TAC ECO... -
Page 7: Available Accessories
1200 m³/h company or by Trotec. 1400 m³/h* Max. 1600 m³/h * At an air volume flow of more than 1200 m³/h the filter class of the H14 HEPA standard filter will be reduced. high-performance air purifier TAC ECO... -
Page 8: Maintenance
• From the outside, check the device for dirt (see chapter Maintenance). If the inside of the device is dirty, have it cleaned by a specialist company or by Trotec. The device still does not operate correctly after these checks: Please contact the customer service. - Page 9 10. Date: ........11. Date: ........12. Date: ........Signature: ........ Signature: ......... Signature: ......... Signature: ......... 13. Date: ......... 14. Date: ........15. Date: ........16. Date: ........Signature: ........ Signature: ......... Signature: ......... Signature: ......... high-performance air purifier TAC ECO...
- Page 10 Clean the housing with a soft, damp and lint-free cloth. Make sure that no moisture enters the housing. Protect electrical components from moisture. Do not use any aggressive cleaning agents such as cleaning sprays, solvents, alcohol-based or abrasive cleaners to dampen the cloth. high-performance air purifier TAC ECO...
- Page 11 2. Remove the filter from the holder. 3. Insert the new air filter into the device. 4. Put the air inlet back on the device and tighten the screws on both sides of the device. high-performance air purifier TAC ECO...
-
Page 12: Technical Annex
40 - 64 dB(A) protection hood (distance 1 m) Dimensions 690 x 610 x 1300 mm (length x width x height) Minimum distance to walls and other objects: top (A): 50 cm rear (B): 50 cm sides (C): 50 cm front (D): 50 cm Weight 81 kg high-performance air purifier TAC ECO... - Page 13 Circuit diagram high-performance air purifier TAC ECO...
- Page 14 The position numbers of the spare parts differ from those describing the positions of the components mentioned in these instructions. Spare part Spare part Castors Bottom housing Air flap cover Cover for maintenance work TAC ECO Housing high-performance air purifier TAC ECO...
- Page 15 Cylinder head screw (DIN 912 – M 8 x 25) Front panel Cylinder head screw (DIN 912 – M 4 x 12) Handle (stainless steel) Detent-edged washer (SKK 4, Ø4.3 x Ø8.2 x 1.2) Cable holder Cylinder head screw (DIN 912 – M 5 x 14) Finger protection Washer (DIN 9021 - Ø5.3 x Ø15 x 1.2) high-performance air purifier TAC ECO...
- Page 16 Cable bushing (M 12x1.5, black) Axis (K-axis 02409-01) Nut (M 12 lock nut, black) Filter box (Z-B1389 filter box 01) Feed-through (Ø14 xØ10xØ6.1x1.5x6.4 mm) Protective bar (K-protective bar 02424-01) Hexagon screw (DIN 933 – M 5 x 45) Self-adhesive needle felt (w/h=19/1mm, l=1440mm) Hexagon screw (DIN 933 – M 10 x 25) high-performance air purifier TAC ECO...
- Page 17 Washer (DIN 125 – A Ø5.3 VA) End stop Control unit (K-control unit ECO 02510-01, black) Differential pressure controller (DDW/H50 200PA-100Pa) DIN rail (K-DIN-rail-00897-01, length =70 mm) End plate Lock against rotation (k-shaped lock against rotation, 2-02311-01) Switch for fan stage selection high-performance air purifier TAC ECO...
- Page 18 The position numbers of the spare parts differ from those describing the positions of the components mentioned in these instructions. Spare part Spare part Washer (DIN 9021 – Ø5.3xØ15x1.2) Protective plate Hexagon nut (DIN 934 – M 5) Air flap cover high-performance air purifier TAC ECO...
- Page 19 Spare part Spare part Hexagon screw (DIN 933 – M 10 x 25) Finger protection Hexagon nut (DIN 934 – M 6 V2A) Finger protection Hexagon socket countersunk screw (DIN 7991 – M 4 x 20 VA) 7 Thread reducer (M 6 to M 4 VA) Adapter plate high-performance air purifier TAC ECO...
-
Page 20: Disposal
The Section A addresses can be obtained from your municipality or local Herewith, we – Trotec GmbH– declare that the machinery administration. You can also find out about other return options designated below was developed, constructed and produced in that apply for many EU countries on the website compliance with the requirements of the EC Machinery... - Page 21 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the TAC ECO and is the answer not in the manual?
Questions and answers