Hitachi ULTRAVISION UT32S402 Operating Manual page 37

SETUP OPERATION (continued)
Watching Images from A/V Center/Monitor Composite Input
Setting Picture Adjustment (continued)
Selected Items
Contrast Mode
3D Color Management
Black Enhancement
3D Comb Filter
Reset
Color Temp. Adjust
Motion Sharpness
Dynamic
It allows you to choose from 3 modes.
Dynamic: Sharpen the gradation to improve the contrast feeling.
Normal Normal : Improve the contrast feeling to reproduce a faithful
Linear
Linear
Off
On : It automatically adjusts the suitable tint, color density, and
brightness on images.
Off : Set it off if the image does not look natural.
On
Off
Low
Adjusts the black level compensation.
Middle
High
Off
This function is available only if D-sub 15 pin - composite cable is
used on Monitor.
Low
This reduces the dot and color blurring in minute scales so that it
Middle
can reproduce purer color.
This is available only when receiving NTSC3.58 composite signal.
High
Each item on this menu screen can be restored to the factory
settings by pressing the
Amplitude
Red
On: When you want to set specific adjustments in each of the 3
Color Temperature modes. You can adjust on the Amplitude
Green
and Cut Off. The settings reflect on the Color Temperature.
Blue
Amplitude: Subdue the colors (Red/Green/Blue) on the
On Cut Off
Cut Off
Red
Green
Reset (Available when On): Select to restore amplitude and Cut
Blue
Off adjustments to default settings by pressing the
Reset
Off: Remains as default setting.
Off
Off
On : Set to On to reproduce clearly the image with fast movement
Off : Set it off if the image does not look natural or flicker appears.
On
Setup hint
gradation.
: Reproduce as faithful gradation as possible.
button.
OK
brighter parts (-63~0).
: Subdue the colors (Red/Green/Blue) on the darker
parts (-31~+31).
button.
OK
36