Connecting To Equipment Having Yp B P R Components Output Terminals; Connecting To Equipment Having Video Output Terminals - Hitachi ULTRAVISION UT32S402 Operating Manual

CONNECTION (continued)
1. Connect your Equipment to the A/V Center (continued)
Connecting to Equipment Having a YPbPr Component Output Terminals
The A/V Center YPbPr Input 3 and 4 terminals can be connected to devices equipped with YPbPr or YCbCr
terminals output. Connect the Y, PB/CB, PR/CR OUT of the device to the INPUT 3 or 4 YPBPR jacks.Connect the
AUDIO OUT signal to the Input 3 and 4 AUDIO IN terminals respectively.

Connecting to Equipment Having Video Output Terminals

The A/V Center Video Composite Input 1 and 2 terminals can be connected to devices equipped with standard
Video terminals output.
NOTE
Please be sure to insert completely all cables when connecting to avoid abnormal picture and sound.
Make sure that the video and audio terminals are connected to the same external device.
Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to
white, etc.
For details of the output format of an external device, refer to "Recommended Signal List" on
21
Component
IN
Video
Green
Blue
Red
(Audio)
White
Red
Composite
IN
Video
Yellow
White
Red
* For Monoaural devices, please connect
Audio signal cable into L input jack .
[Example]
OUT
Green
DVD player
Blue
Red
Satellite Receiver
Home video game system
White
Red
[Example]
VCR
DVD player
OUT
Yellow
Satellite Receiver
White
Camcorder
Red
Home video game system
.
50