Quick Start Guide
•
Two tilt mount bases (one for the source and one for the detector).
•
Commissioning kit, three options when ordered:
—
For methane calibration
—
For propane calibration
—
For ethylene calibration
The commissioning kit includes:
•
Alignment tool kit
•
Function check filters
•
HART
Other accessories are available (per customer request):
•
5-in. pole mount kit
•
2 to 3-in. pole mount
•
Wall mount
•
Protective cover
Note
See the Rosemount 935 Product Data Sheet for accessory part numbers.
1.2.2
Required tools
You can install the detector using general purpose common tools and
equipment.
Table 1-2: Tools
Tool
Alignment kit
Hex key 8 mm
Hex key 3/16 in.
Hex key 5/16 in.
Flat screwdriver 4 mm
Flat screwdriver 2.5 mm
If you order a source or detector separately, you will receive one tilt mount.
(1)
8
®
hand-held harness kit
Function
Provides tools to install fine alignment tool.
Mounts the detector on the tilt mount.
Aligns the detector.
Screws ¾ stop plug.
Connects ground terminal.
Connects wires to the terminal block.
April 2021
(1)
Emerson.com/Rosemount