What Is In This Guide; Safety Summary - Fluke II Series Operator's Manual

What is in this Guide?

The Operator Guide begins with safety
information, a short meter calibration exercise for
new users, then continues with a condensation of
information from the Operator Manual . For
complete information about the Calibrator's
features, functions, and operating procedures,
refer to the Operator Manual .

Safety Summary

Lethal voltage may be present on the
terminals. Observe all safety
precautions in this guide.
To avoid electrical shock hazard, the operator
should not electrically contact the OUTPUT HI or
SENSE HI binding posts. During operation, lethal
voltages of up to 1100V ac or dc may be present
on these terminals.
Whenever possible, keep one hand away from the
equipment to reduce the hazard of current flowing
through vital organs of the body.
Symbols Marked on Equipment
[
Warning - Risk of electric shock.
Q
Ground Protective ground (earth) terminal.
P
Attention Refer to the manual for
information about this feature. This symbol
appears on the rear panel ground terminal
and by the fuse holder.
To avoid fire hazard, use only the fuse specified
on the line voltage selection switch label.
Warning
[
Use the Proper Fuse
2