Using Error Mode (cont.)
Keys
E
+, then E
A keypad entry, then
E
N
Y
Z
o
S
r
The "Setup Menus"
softkey
Returns to the previous reference
value.
Establishes a new reference.
Establishes a new reference.
Establishes the present output as a
new reference.
Sets the Calibrator to ten times the
reference value and establishes a new
reference.
Sets the Calibrator to one-tenth the
reference value and establishes a new
reference.
Identifies the present output as a zero-
scale endpoint for scaling, and
establishes 0.0 as the new reference.
Identifies the present output as a full-
scale endpoint for scaling and causes
the display to show scale error.
Returns to the power-up state.
Opens the setup menu.
36
Action