Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Remote Access
The Remote Access function can secure remote host access to your router from
LAN and WAN interfaces for some services provided by the router. These
services include Telnet, FTP, TFTP, HTTP, SNMP and PING.
Please click 'System' menu on the left of web management interface, then click
'Remote Management', and the following page will be displayed on your web
browser:
Parameter
Description
LAN
Check/un-check the services on the LAN column to allow/un-
allow the services access from LAN side.
WAN
Check/un-check the services on the WAN column to allow/un-
allow the services access from WAN side.
WAN Port
This field allows the user to specify the port of the
corresponding to the service. Take the HTTP service for
example; when it is changed to 8080, the HTTP server address
for the WAN side is http://dsl_addr:8080, where the "dsl addr"
is the WAN side IP address of the router.
When you finish, click 'Apply Changes'. You'll see the following message
displayed on web browser:
Advertisement
Table of Contents
Need help?
Do you have a question about the WLM-1500 and is the answer not in the manual?
Questions and answers