Sitecom WLM-1500 Manual page 57

All manuals and user guides at all-guides.com
ACL Configuration
The Access Control List (ACL) is a list of permissions attached to the router. The
list specifies who is allowed to access this router. If ACL is enabled, all hosts
cannot access this router except for the hosts with IP address in the ACL table.
Parameter Description
ACL Capability Enable or disable the ACL function
Enable Check to enable this ACL entry
Interface Select the interface domain: LAN or WAN
IP Address Enter the IP address that is allowed to access the router.
Subnet Mask Enter the Subnet Mask that is allowed to access the router.
ACL Table The ACL settings will be listed here. You can click "Delete
Selected" to delete the settings you have selected. If you
want remove all settings from the table, just click "Delete
All" button.
When you finish, click 'Apply Changes'. You'll see the following message
displayed on web browser:
Press 'Continue' to save the settings made and back to web management
interface; press 'Apply' to save the settings made and restart the router so the
settings will take effect after it reboots.