Sitecom WLM-1500 Manual page 51

All manuals and user guides at all-guides.com
Port Filter
The IP/Port filtering feature allows you to deny/allow specific services or
applications in the forwarding path.
Parameter
Outgoing Default
Action
Incoming Default
Action
Direction
Protocol
Rule Action
Source IP Address
Subnet Mask
Description
Specify the default action on the LAN to WAN (Traffic to
Internet) forwarding path. You can choose 'Allow' if you
allow the IP Addresses listed in the following table to
connect to the Internet; choose 'Deny' if you deny the
IP Addressed listed in the following table to connect to
the Internet.
Specify the default action on the WAN to LAN (Traffic
from Internet) forwarding path. You can choose 'Allow'
if you allow the IP Addresses listed in the following
table from connecting to the Internet; choose 'Deny' if
you deny the IP Addressed listed in the following table
from connecting to the Internet.
Select the traffic forwarding direction: outgoing or
incoming.
There are 3 options available: TCP, UDP and ICMP.
Deny or allow traffic when matching this rule.
Enter the start IP Address which will be monitored.
Enter the Subnet Mask based on the Source IP