Sitecom WLM-1500 Manual page 48

All manuals and user guides at all-guides.com
Send Mode
RIP Config Table
When you finish, click 'Apply Changes'. You'll see the following message
displayed on web browser:
Press 'Continue' to save the settings made and back to web management
interface; press 'Apply' to save the settings made and restart the router so the
settings will take effect after it reboots.
passed to the DSL device in order for it to be
accepted into its routing table.
Indicate the RIP version this interface will use when it
sends its route information to other devices.
The RIP you have configured will be listed in the table.
If you want to delete some settings, please select the
settings and click "Delete Selected".