Sitecom WLM-1500 Manual page 33

All manuals and user guides at all-guides.com
Regenerate PIN
Push Button
Configuration
Start PBC
Reset
Client PIN Number
When you finish, click 'Apply Changes'. You'll see the following message
displayed on web browser:
Press 'Continue' to save the settings made and back to web management
interface; press 'Apply' to save the settings made and restart the router so the
settings will take effect after it reboots.
Click to regenerate the Self-PIN Number.
Clicking this button will invoke the PBC method of
WPS. It is only used when AP acts as a registrar.
Click to start the Push Button method of WPS.
It restores the original values.
It is only used when users want their station to join
AP's network. The length of PIN is limited to four or
eight numeric digits. If users enter eight-digit PIN with
checksum error, there will be a warning message
popping up. If users insist on this PIN, AP will take it.