Download Print this page

Getting Started - Electrolux RENEW 800 Instruction Book

Hide thumbs Also See for RENEW 800:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
fill the tank with 50% tap water and 50% bottled distilled water. Never use distilled water only. Never put
EN
scented water, vinegar or ironing aids in the water tank. This may cause brown spitting and staining of
garment.
CNS
• The iron is not to be used if it has been dropped, if there are visible signs of damage on the iron or if it is
leaking.
CNT
• The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that
the surface on which the stand is placed is stable.
• The mains plug must be removed from the mains socket before the water tank is filled with water.
KR
• The power cord must not come into contact with any hot parts of the appliance.
• The surfaces are liable to get hot during use.
ID
• Do not exceed the maximum filling volume as indicated on the appliances.
• The water tank lid must not be opened during use.
TH
• The boiler drain cap must not be opened or removed during use.
• Descale the boiler regularly according to the instructions in chapter 'Cleaning and Maintenance' in the
VN
user manual.
• This appliance is intended for domestic use only. Electrolux does not accept any liability for possible
damage caused by improper or incorrect use.
Picture page 2-4

GETTING STARTED

1
Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Position the
steam station iron horizontally on the ironing-board or on a heat resistant, secure surface at the
same height as an ironing-board. Unwind and straighten the power cord and the steam hose.
2
Remove the water tank (F) by gripping the slot on the underside and pulling it gently away from
the boiler unit. Detach the anti-calc cartridge (U) and then immerse it in water for more than 60 sec.
Insert the anti-calc catridge back. Fill the water tank using cold water. It is recommended to use
distilled water or a mix of 50% distilled, 50% tap water. Empty the water tank to rinse out any foreign
particles which may have remained from the manufacturing process. We recommend to replace the
anti-calc cartridge after 3 months.
3
Always refill the water tank to MAX level using cold water (F).
Caution! Never operate the appliance without any water in the tank.
4
Connect the steam station to the mains supply. Press the ON/OFF button. Select ironing pro-
gramme from the touch screen on the iron. The light indicator on the iron will pulsate when the steam
station is preheating. When turned on for the first time, temporary vapours/odours may occur.
5
As soon as the selected temperature has been reached, the light indicator is on permanently and
the headlight turns on. Now the appliance is ready to be used.
6
The steam station is equipped with ECO setting. Ironing on ECO setting in each programme selected
saves up to 20% energy consumption. ECO setting is using lower pressure, producing lower steam rate but
delivering faster heat-up time.
OPERATING INSTRUCTIONS
7
Unlock the iron by switching the locking mechanism to
starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are
transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.
8
To activate the steam function, press and hold the steam boost button for 3-5 seconds. Hold the
steam boost button to eject a concentrated jet of steam. When releasing the button, use up the
steam before putting it back on the iron rest of the steam station. It is recommended that the steam
button is used for short periods.
Caution! Never release steam while the iron is standing on its rest.
9
Turn off the appliance by pressing the ON/OFF button (lighting will go off).
10
Always cool the iron fully on the iron rest before storing away. Once the iron is cool, empty the
water tank. Store the steam station iron on the iron rest.
11
When finished using the appliance, switch off by pressing the ON/OFF button. Put the iron on the
iron rest area and switch the locking mechanism to
6
and lift it from the iron rest area. Before
in order to secure the iron.
www.electrolux.com

Advertisement

loading

This manual is also suitable for:

E8ss1-80gm