Replacing The Accessories; About The A681 Hybrid Filter; Replacing The A681 Hybrid Filter; Deleting A Notice In The App - Boneco H700 Manual

REPLACING THE ACCESSORIES

ABOUT THE A681 HYBRID FILTER

The A681 HYBRID filter has to be changed after
about one year to ensure that dirt and pollen con-
tinue to be filtered from the air.
The display indicates a pending need to replace the
A681 HYBRID filter with the following symbol:
The A681 HYBRID filter is replaced according to the
figures on pages 44 and 45.
You can obtain an A681 HYBRID filter from your
BONECO specialist dealer or the BONECO online store
at:
www.shop.boneco.com

REPLACING THE A681 HYBRID FILTER

1. Remove the front cover of the BONECO H700.
2. Take off the pre-filter.
3. Remove the used A681 HYBRID filter and dispose
of it with your regular household waste.
4. Remove the protective foil from the new A681
HYBRID filter.
5. Insert the A681 HYBRID filter into the holder as
shown on the label.
6. Reinsert the pre-filter and the front cover.

DELETING A NOTICE IN THE APP

The notice can be deleted from the display in the
BONECO app.

DELETING A NOTICE ON THE APPLIANCE

The notice can also be deleted on the appliance.
1. Press and hold the output regulator for three sec-
onds until the "CL" notice flashes on the display.
2. Use the output regulator to select the
3. Briefly press the output regulator to confirm the
selection.
The notice is deleted.
65
en
symbol.