Table of Contents
Advertisement
Available languages
Available languages
46
MANUAL HANDLING
en
ABOUT MANUAL HANDLING
Manual handling works conveniently with the out-
put regulator. The BONECO app offers additional,
extensive options for control and automation of the
BONECO appliance.
AUTO MODE
If you have never operated the BONECO appliance
with the BONECO app and switch it on for the first
time, it starts up in AUTO mode. The appliance is
preset to a target relative humidity of 50 percent.
The performance level is automatically adapted to
the current humidity and air pollution: The drier or
more polluted the air, the higher the performance
level.
When the preset humidity is achieved and the air is
purified, the appliance switches to standby mode,
which is indicated by the pulsing LED:
If the humidity drops below the set level or the air
quality decreases, the BONECO appliance resumes
operation.
ADAPTED AUTO MODE
If you have already operated the BONECO appliance
with the BONECO app and set a different humidity,
that value is automatically taken over when the ap-
pliance is switched on.
SWITCHING ON AND OFF
1. Briefly press the output regulator once to switch
on the BONECO appliance.
The appliance is always in AUTO mode when it is
switched on. You can identify active AUTO mode by
the small LED that lights up above the output regu-
lator.
2. To switch off the BONECO appliance while it is in
AUTO mode, briefly press the output regulator
once.
Advertisement
Chapters
Table of Contents
