Raider Power Tools RD-GG11 User Manual page 14

14 www.raider.bg
3.3 Check the air cleaner.
Check the air cleaner element to be sure it is clean and in good condition.
Loosen the cover screw and remove the left side maintenance cover.
Press the latch tab on the top of the air cleaner body, remove the air cleaner cover, check
the element. Clean or replace the element if necessary.
Never run the engine without the air cleaner. Rapid engine wear will result from contaminants,
such as dust and dirt, being drawn through the carburetor, into the engine.
4. STARTING THE ENGINE
Ensure sufficient ventilation of the unit.
Ensure that the ignition cable is attached to the spark plug.
Consider the immediate environment of the electric generator.
Turn off any electrical appliance switched from electric generator.
When starting, wear protective gloves.
1. Turn the fuel cap lever fully clockwise to the "ON" position. Turn the fuel cock to the
"ON" position.
NOTE: Turn the fuel cap vent lever to the "OFF" position when transporting the generator.
2. Turn the engine switch to the "ON" position.
3. Move the choke lever to the "START" position.
NOTE: Do not use the choke when the engine is warm or the air temperature is high.