Selection Dial Outer Edge Play - Brother XL-6060 Series Service Manual
Hide thumbs
Also See for XL-6060 Series:
- Instruction manual (101 pages) ,
- Instruction manual (103 pages)
Table of Contents
Advertisement
15.
SELECTION DIAL OUTER EDGE PLAY
STANDARD
The selection dial outer edge play should be 0.5-2 mm.
ADJUSTMENT
1.
Loosen the screw securing the presser plate.
2.
Rotate the selection dial bearing to adjust the play.
3.
Tighten the screw securing the presser plate.
Adjustment Points
2.
Turning the selection dial bearing so that the alignment mark is up reduces play; turning it so that it is
down increases play.
www.promelectroavtomat.ru
-43-
Alignment mark
Advertisement
Chapters
Table of Contents
