Inner Rotary Hook Retainer Plate L Position - Brother STAR240E Service Manual

9.

INNER ROTARY HOOK RETAINER PLATE L POSITION

STANDARD
The clearance between the inner rotary hook retainer plate L and the rotary hook assembly top surface should be
0.4-0.6 mm.
ADJUSTMENT
1. Loosen the screw securing the inner rotary hook retainer plate L.
2. Adjust the vertical position of the inner rotary hook retainer plate L and adjust so that the clearance between
the inner rotary hook presser plate L and the rotary hook assembly top surface is 0.4-0.6 mm.
3. Tighten the screw securing the inner rotary hook retainer plate L.
www.promelectroavtomat.ru
Inner rotary hook retainer plate
0.4-0.6 mm
-40-