Selection Dial Outer Edge Play - Brother STAR240E Service Manual

15.

SELECTION DIAL OUTER EDGE PLAY

STANDARD
The selection dial outer edge play should be 0.5-2 mm.
ADJUSTMENT
1. Loosen the screw securing the presser plate.
2. Rotate the selection dial bearing to adjust the play.
3. Tighten the screw securing the presser plate.
Adjustment Points
2. Turning the selection dial bearing so that the alignment mark is up reduces play; turning it so that it is
down increases play.
www.promelectroavtomat.ru
-46-
Alignment mark