Brother STAR240E Service Manual page 29

86. Install the motor (motor holder) with the two screws, and then hang the driving belt.
(See Adjustment Procedure 3.)
87. Tighten the cord clamp and install with the screw.
88. (STAR240E, STAR230E)
Install the PC board assembly with the three screws, then fasten the lamp cord with the three bundling
bands.
(PS57, PS55, PS53)
Install the 3-pin socket holder assembly with the two screws, then fasten the lamp cord with the three
bundling bands.
(STAR240E, STAR230E)
(PS57, PS55, PS53)
www.promelectroavtomat.ru
Lamp cord
Lamp cord
-27-