Brother STAR240E Service Manual page 18

31. Remove the lock ring for the horizontal feed arm shaft, loosen the horizontal feed arm set screw, then
remove the horizontal feed arm shaft.
32. Remove the screw, then remove the feed dog slide guide assembly. Remove the screws holding the
horizontal feed assembly center right and the horizontal feed assembly center left, remove the horizontal
feed assembly center right and the horizontal feed assembly center left, then remove the horizontal feed
shaft assembly.
33. Remove the forked connecting rod.
34. Loosen the rotary hook shaft set screw, then remove the rotary hook assembly, rotary hook shaft, and three
washers.
35. Remove the screw holding the tension pulley assembly, then remove the tension pulley assembly.
36. Remove the screw holding the eccentric metal presser and the screw holding the lower shaft metal presser,
then remove the lower shaft assembly.
Disassembly Point
32. Be careful not to lose the pressure spring (A) in the horizontal feed assembly center left.
www.promelectroavtomat.ru
STAR240E,
STAR230E only
-16-