Brother STAR240E Service Manual page 16

23. Remove the screw holding the thread take-up lever shaft fastening plate, then remove the thread take-up
lever shaft.
24. Remove the left thread take-up lever screw, then remove the thread take-up lever.
25. Loosen the thread take-up crank set screw, then remove the needle bar crank and the needle bar crank rod.
Disassembly Point
24. Remove the left thread take-up lever screw by holding the balance wheel by hand so that the upper shaft
does not turn and turning the screwdriver to the right.
25. Loosen the thread take-up crank set screw by holding the balance wheel by hand so that the upper shaft
does not turn.
www.promelectroavtomat.ru
-14-