USB Keyboard Interface
The USB interface is one of the common standard peripheral
interfaces for today's computer system working under
Windows
98 and Windows
®
Scanning the following bar code will program for the USB
interface.
USB Keyboard Interface
Main Cable
USB Keyboard Interface Connection
2000 or above.
®
To Computer USB Port
Terminal Interfaces
Make sure your computer has a USB port and the operating
system is Windows
or above.
Plug the RJ45 phone plug of the scanner main cable into the
USB keyboard cable converter.
Plug the 4-pin USB Type A connector into the desired USB port
of your computer. You will hear the power-on beep twice to signal
that the power-on routine of the scanner is completed.
Whenever the scanner's USB interface scanner is connected to
any computer system for the first time, a string of " USB
Manufacturer ID " messages will display to register the scanner
into the operating system.
Please scan the " USB Keyboard Interface " bar code to
configure the scanner into USB keyboard interface mode. The
scanner is now ready to use.
2-4
®
98, Windows NT
®
5.0, and Windows
®
2000