2
SETUP
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount and tighten the screws evenly.
Guideline
Screw, handlebar clamp
201940-10
Info
The markings on the handlebar should be at the center of the handlebar
clamps.
Keep the gap widths equal when tightening.
–
Position the handlebar cushion and secure with a cable binder.
201941-10
–
Remove screw
–
Position the start number plate. Mount and tighten screw
Guideline
Remaining screws, chassis
Info
Ensure the holding lugs engage in the fender.
–
Position the brake line and guide. Mount and tighten screw
201942-10
–
Connect the fuel line to the fuel tap.
201943-10
–
Mount the footrests with the springs and pins. Secure the pins using the washers
and cotter pins.
Pliers for footrest spring (58429083000)
800042-10
with the guide from the start number plate.
2
M8
20 Nm
(14.8 lbf ft)
.
3
M6
10 Nm (7.4 lbf ft)
.
2
4