Brandt BMS7120 User Instructions page 106

Environment SAFETY INSTRUCTIONS
Do not use a steam cleaner.
The electrical plug must remain
accessible after installation.
It must be possible to dis-
connect the appliance from
the power supply, either using
a plug or by fitting a switch
on the fixed wiring system in
accordance with installation
rules.
If the power cable is damaged,
it should be replaced by the
manufacturer, its after-sales
service department or by a si-
milarly qualified person in or-
der to avoid danger.
Centre the oven in the unit so
as to ensure a minimum dis-
tance of 10 mm between the
appliance and the surrounding
unit. The unit supporting the
appliance must be made of
heat-resistant material (or co-
vered with a heat-resistant ma-
terial). For greater stability, at-
tach the oven to the unit with 2
screws through the holes pro-
vided on the side panels.
WARNING:
Only allow children to use the
oven without supervision if
adequate
been given so that the child is
able to use the oven safely and
understands the dangers of in-
correct use.
6
instructions
This appliance is not designed
to operate above an oven in
pyrolysis mode.
This appliance must be ins-
talled at a height of 850mm
or more above the ground the
ground.
This appliance may be installed
in a cabinet column, as shown
in the installation diagram.
have