NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Route the display cable through the routing guides on the display back-cover.
2. Adhere the camera cable to the display back-cover.
3. Connect the camera cable to the camera module.
4. Align the screw holes on the right display hinges with the screw holes on the display panel.
5. Replace the screws that secure the display hinges to the display panel.
Post-requisites
1. Replace the
display
panel.
2. Replace the
display
bezel.
3. Replace the
display
assembly.
4. Replace the
wireless
card.
5. Replace the battery.
6. Replace the
base
cover.
7. Replace the
optical
drive.
82
Replacing the display cable
Replacing the display cable
computer. After working inside your computer, follow the instructions in
48
After
www.dell.com/