NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
NOTE:
These instructions are only applicable for laptop with non-touchscreen display.
1. Slide the display cable into the display-panel cable connector and press down the latch to secure the cable.
2. Adhere the tape over the display-panel cable connector.
3. Gently place the display panel on the display back-cover and align the screw holes on the display panel with the screw holes
on the display back-cover.
4. Replace the screws that secure the display panel to the display back-cover.
Post-requisites
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the battery.
5. Replace the
base
cover.
6. Replace the
optical
drive.
Replacing the display panel
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Replacing the display panel
42
73