Removing the optical-drive interposer
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the battery.
Procedure
1. Lift the latch and disconnect optical-drive connector board cable from the optical-drive board connector.
2. Remove the screws that secure the optical-drive connector board to the palm rest and keyboard assembly.
3. Lift the optical-drive connector board off the palm rest and keyboard assembly.
1. optical-drive connector board
3. latch
46
Removing the optical-drive interposer
computer. After working inside your computer, follow the instructions in
2. M2x2 screws (2)
4. optical-drive connector board cable
25
After
www.dell.com/