Safety Of Others; Residual Risks - Black & Decker BESTE625 Manual

ENGLISH
object, switch the appliance off and
remove the plug from the socket.
Check for any damage to the
appliance, replace or repair any
damaged parts, check for and tighten
any loose parts.
Avoid using the machine in bad

weather conditions especially when
there is a risk of lightning.
Use in a dry location only. Do not allow

the machine to become wet.
Do not immerse the machine in water.

Do not open the body casing. There

are not user-serviceable parts inside.
Do not operate the machine in explosive

atmospheres, such as in the presence of
flammable liquids, gases or dust.
To reduce the risk of damage to

plugs or cords, never pull the cable to
remove the plug from a socket.

Safety of others

Never allow children, persons with

reduced physical, sensory or mental
capabilities or lack of experience and
knowledge or people unfamiliar with
these instructions to use the machine,
local regulations may restrict the age
of the operator.
Children shall not play with the machine.

Cleaning and user maintenance shall

not be made by children without
supervision.

Residual risks

Additional residual risks may arise when
using the tool which may not be included
6
(Original instructions)
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks can
not be avoided. These include:
Injuries caused by touching any

rotating/moving parts.
Injuries caused when changing any

parts, blades or accessories.
Injuries caused by prolonged use of a

tool.
When using any tool for prolonged
periods ensure you take regular breaks.
Impairment of hearing.

Health hazards caused by breathing

dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF).
Vibration
The declared vibration emission values stated
in the technical data and the declaration
of conformity have been measured in
accordance with a standard test method
provided by EN50636 and may be used for
comparing one tool with another.
The declared vibration emission value
may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly