Summary of Contents for GRASS VALLEY EYECATCHER EC270
Page 1
All manuals and user guides at all-guides.com EYECATCHER EC270 2.7-Inch Color LCD Ocular Viewfi nder Service Manual 3922 496 32011 Version V1.0 www.grassvalley.com May 2013...
All other tradenames referenced are service marks, trade marks, or registered trademarks of their respective compa- nies. Website Visit the Grass Valley public website to download the latest user’s guide updates and additional information about your broadcast product: www.grassvalley.com Eyecatcher 2.7” LCD VF Service Manual V1.0...
Page 3
All manuals and user guides at all-guides.com DOCUMENT INDENTIFIER EYECATCHER_LCD_VF_Servicemanual DATE 01-May-2013 KEYWORDS Service Manual Documentation EC270 COMPANY Grass Valley Nederland B.V. DOCUMENT HISTORY Release Date Reason of change Status Distribution November 2012 Initial Version Initial Internal May 2013 Published version...
Grass Valley’s end-of-life product take back program assures proper disposal by use of Best Available Technology. This program accepts any Grass Valley branded equipment. Upon request, a Certifi cate of Recycling or a Certifi cate of Destruction, depending on the ultimate disposition of the product, can be sent to the requester.
All manuals and user guides at all-guides.com Safety Summary This information is intended as a guide for trained and qualifi ed personnel who are aware of the dangers involved in handling potentially hazardous electrical / electronic equipment. It is not intended to contain a complete list of all safety precautions which should be observed by personnel in using this or other electronic equipment.
All manuals and user guides at all-guides.com Special tools Extraction Tool Part number 1688076 Supplier: Farnell To disconnect the connector, insert the end portion of the tool under the connector fl anges an pull off vertically, in the direction of the connector mating axis. To mate the connector, the mating axes of both connectors must be aligned and the connectors can be mated.
Page 9
All manuals and user guides at all-guides.com Aardvark Tool Supplier: www.totalphase.com/products/aardvark_i2cspi Download Tool Flat Panel Viewfi nder 3922 407 58341 Download Tool FP VF 1-10 Eyecatcher 2.7” LCD VF Service Manual V1.0...
All manuals and user guides at all-guides.com Chapter 2 Exploded Views: 2.1 Front View Microphone Clamp Eyepiece Tally Back Menu/Peak Contrast Brightness Switches: -----Rotary Knobs----- Rotary Knob Mode Flying Lead Switch Knob Tally SW C (Assignable) Eyecatcher 2.7” LCD VF Service Manual V1.0...
All manuals and user guides at all-guides.com Chapter 3 Replacement Section: 3.1 How to use: The replacement section consists of: Dismantling Flowchart . On this fl owchart, locate the part that has to be replaced. Disassemble the unit part by part till you reach the part to be replaced. After replacement, assemble the unit in reverse order.
All manuals and user guides at all-guides.com 3.2 Flowchart EYECATCHER EC270 2.7” LCD Viewfinder Eyecatcher Bottom Housing Assy Top Housing Assy Mechanics LCD Housing Assy Bottom Housing Assy Top Housing Assy Main Board 2.7” VF User IO Board 2.7” VF 3922 406 56371 3922 406 56381 Tally Cover Assy...
Page 14
All manuals and user guides at all-guides.com 3.3 Replacements Removal of the Microphone Clamp Assy ->Turn the Thumb Screw counter clockwise, to release the Microphone Assy Eyecatcher 2.7” LCD VF Service Manual V1.0...
All manuals and user guides at all-guides.com How to open the Viewfi nder Housing First remove: Page 3-3 Microphone Holder ->Unscrew the fi ve screws on the bottom side. ->Place the Viewfi nder with the Top Housing down. ->Open the housing, be carefull for the internal wiring. Eyecatcher 2.7”...
All manuals and user guides at all-guides.com Bottom Housing Assy First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing ->Disconnect the fl atcable from the LCD Housing assy to X6119. ->Disconnect the Power/Control part of the Flying Lead to X7. ->Disconnect the Y, R-Y and B-Y coax connectors to X1, X2 and X3 ->Use the special Extraction Tool to pull off the connectors.
All manuals and user guides at all-guides.com Flying Lead Cable Assy First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing Page 3-5 Bottom Housing Assy ->Unscrew two screws to release the Grounding Clamp. ->Remove the Flying Lead Cable Eyecatcher 2.7”...
All manuals and user guides at all-guides.com User IO Board 2.7 Inch VF First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing Page 3-5 Bottom Housing Assy Page 3-6 Flying Lead Cable Assy ->Remove the three Knobs for Peaking, Contrast and Brightness ->Disconnect the fl...
Page 19
All manuals and user guides at all-guides.com Main Board 2.7 inch VF (in Top Housing) First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing Page 3-5 Bottom Housing Assy ->Unscrew three screws to remove the Main Board. ->Remove the Main Board.
All manuals and user guides at all-guides.com Tally Cover Assy (in Top Housing) First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing Page 3-5 Bottom Housing Assy Page 3-8 Main Board ->Unscrew the screw to remove the Tally Cover Assy. Eyecatcher 2.7”...
Page 21
All manuals and user guides at all-guides.com 2.7 Inch VF LCD Housing Assy First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing 1 -> Disconnect the fl atcable from the LCD Housing assy to X6119. 2 -> Unscrew the three screws to release the 2.7”...
All manuals and user guides at all-guides.com VF LCD Housing Flatcable First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing Page 3-10 2.7” VF LCD Housing Assy 1 -> Unscrew the four screws to release the LCD Display from the LCD Housing. 2 ->...
All manuals and user guides at all-guides.com Mirror Housing First remove: Page 3-3 Microphone Holder Page 3-4 Open the Viewfi nder Housing Page 3-10 2.7” VF LCD Housing Assy 1 -> Press the two Clamps to release the Eyepiece Assy Mirror House Eyepiece Assy 3-12...
All manuals and user guides at all-guides.com Chapter 4 Spare parts: 4.1 Eyecatcher Main Parts 8926 530 32001 Eyecatcher Top Housing Assy Bottom Housing Assy 2.7” VF LCD Housing Assy Eyecatcher 2.7” LCD VF Service Manual V1.0...
Page 25
All manuals and user guides at all-guides.com Mirror House 2.7” VF Assy 2.7” VF Eyepiece Assy Microphone Clamp Assy 2.7” VF Assy Eyecatcher 2.7” LCD VF Service Manual V1.0...
All manuals and user guides at all-guides.com 4.2 Top Housing Assy Top Housing Assy 3922 406 56371 Main Board 2.7” VF 3922 407 62721 Tally Cover Assy Eyecatcher 2.7” LCD VF Service Manual V1.0...
All manuals and user guides at all-guides.com 4.5 Mirror House 2.7” VF 3922 407 62271 Mirrror House 2.7” VF Eyecatcher 2.7” LCD VF Service Manual V1.0...
All manuals and user guides at all-guides.com Chapter 5 Blockdiagrams 5.1 Power 3922 406 56371 Main Board LCD Board 2,7 Inch VF 3922 406 56381 User IO Board ID Board Viewfinder Connector Signal Pin(s) 12v_Cam 9,10 +Batt_Prot DC-DC -2,5V Converter HOTSWAP X6119 PROTECTION...
All manuals and user guides at all-guides.com 5.2 Video 3922 406 56371 Main Board LCD Board 2,7 Inch VF 3922 406 56381 User IO Board ID Board Viewfinder Connector X6119 LVDS (0:3) FPGA LVDS (0:3) Parallel (0:7) Signal X6119 N(0) P(0) (0:7) N(1)
All manuals and user guides at all-guides.com 5.3 Control and Diagnostics 3922 406 56371 Main Board LCD Board 2,7 Inch VF 3922 406 56381 User IO Board ID Board Signal Pin(s) Viewfinder Connector 1,2,4 BUS I²C CAM BUS CAM X6100 Test Connector BUFFER I²C...
All manuals and user guides at all-guides.com 6.2 Status Information Diagnostic Status Info Menu will show in an overview information about the Viewfi nder, this information can also be exported to an Excel sheet with the Script fi le “CollectVFStatusInfo_LDK5303.tsc”. Information available: •...
Page 38
All manuals and user guides at all-guides.com Status Information exporting to an Excel sheet: Connect the LCD Viewfi nder with a null-modem cable to a PC or Laptop, with LDK Scripter version 8.0 or later on it. Select RS232 as Down load Method. (It is also possible to use the download tool. Select USB- aardvark-iic as Download Method, see Chaper 7, Maintenance) Run the “CollectVFStatusInfo_LDK5303.tsc”...
Page 39
All manuals and user guides at all-guides.com Eyecatcher 2.7” LCD VF Service Manual V1.0...
All manuals and user guides at all-guides.com 6.3 Operation Log Data Operation Log Data function will show in an overview information about the usage of the LCD Viewfi nder: • Total run-hours • Power cycles • Calibration Count • Run Hours Log Data •...
Page 41
All manuals and user guides at all-guides.com Operation Log Data exporting to an Excel sheet: It is also possible to export this information to an Excel Sheet with script “CollectVFOperation LogData_LDK5303.tsc”. Make sure that the fi le ‘OperLog_template.xls” is also in the same Directory. Connect the Viewfi...
Chapter 7 Maintenance 7.1 Package Download It is possible to update the Eyecatcher EC270 VF in the stand-alone mode when you have: • Aardvark I²C/SPI Host Adapter. • Power Supply (12 Vdc). • Laptop or PC with LDKScripter 7.3 or higher.
Page 43
All manuals and user guides at all-guides.com TOTALPHASE Website: www.totalphase.com Install the drivers for the Aardvark by running the fi le “TotalPhaseUSB-v2.11”. Connect the Aardvark via the USB connection to your PC or Laptop for Firmware update. Update by clicking the fi le “aafl ash-windows’. Eyecatcher 2.7”...
Page 44
All manuals and user guides at all-guides.com The next DOS-screen will pop-up. Fill in for Port: “0” and “enter” Firmware update is completed. The Aardvark is ready for use. Eyecatcher 2.7” LCD VF Service Manual V1.0...
Page 45
Connection Diagram 10.7 to 17 Vdc in Download tool LDK 5307 When the Download tool is connected correctly it is possible to update the Eyecatcher EC270 VF stand-alone. Warning: Do not switch off power during download process. Warning: Do not switch off power during download process.
Page 46
All manuals and user guides at all-guides.com Run “load_package_392240761791.tsc” from the Package Eyecatcher directory. Follow the instructions on the screen. Next Pop-up screen will appear. Depending on the Status of the Viewfi nder, downloading can start. Also the “CollectVFStatusInfo_LDK5303.tsc” can collect data for the Excel sheet. The “CollectVFOperationLogData_LDK5303”...
Need help?
Do you have a question about the EYECATCHER EC270 and is the answer not in the manual?
Questions and answers