Introduction
1.1
Objective
The objective of this application guide is to help the user become familiar with the steps
required to configure a SmartLinx device in Step 7.
1.2
Equipment
Equipment
SITRANS instrument
.gsd file
SIMATIC STEP 7 ver. 5.2 (SP. 1)
MPI/PROFIBUS Interface to PLC
Terminal screwdriver
PC or Laptop
1.3
Disclaimer
Note
While every effort is made to verify the following information, no warranty of accuracy or
usability is expressed or implied.
4
Configuring a SmartLinx ready device with a PROFIBUS DP card in a S7-300 or S7-400 PLC
Article No.
Application examples, 08\2020, AG060425
1