Advertisement
Step 4 - Adding the device to the network
1. Open the Hardware catalog by clicking on the third icon from the right (mouse-over will
verify).
2. The .gsd file for the MultiRanger is located in /PROFIBUS DP/Additional Field
Devices/General/ ANYBUS S PDP.
Note
• Please note that the MultiRanger file is ANYBUS-S PDP.
• For the AiRanger or SITRANS LU instruments, the .gsd is in the same location, but is
3. Highlight the PROFIBUS DP network where the MultiRanger is going.
Configuring a SmartLinx ready device with a PROFIBUS DP card in a S7-300 or S7-400 PLC
Application examples, 08\2020, AG060425
called AB-DT-PDP.
Planning/configuring
3.1 Required steps
9
Advertisement
