Download Print this page

Troubleshooting - Electrolux EKM3407K Instruction Book

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

TROUBLESHOOTING

Problem
The motor slows down during operation. Amount of dough may exceed
The appliance does not work.
The appliance vibrates/moves
during operation.
Disposal
Packaging materials
The packaging materials are environmentally friendly and can be recycled. The plastic components are
identified by markings, e.g. >PE<, >PS<, etc. Please dispose the packaging materials in the appropriate
container at the community waste disposal facilities.
Old appliance
The symbol
on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information about recycling
of this product, please contact your local city office, your household waste disposal service or the shop
where you purchased the product.
www.electrolux.com
Possible
cause
maximum capacity.
Dough may be too wet, it sticks onto
the side of the bowl.
The appliance is not connected to
the mains.
The speed selector was not in "0"
position when the machine was
unplugged.
The rear attachment hub cover is not
in place.
The suction feet are not fixed to the
surface properly.
It is normal for heavy loads (e.g heavy
dough, cheese).
Solution
Remove half and process in two
batches.
Add more flour, 1 tablespoon at a time
until the motor speeds up. Process until
dough cleans the side of the bowl.
Make sure to plug in the appliance
before operation.
Turn to speed selector to "0" position,
and then to the desired speed.
Make sure that the rear attachment hub
cover is securely attached.
Make sure the suction feet are clean.
Place the machine on a smooth and
shiny surface.
Remove half and process in two
batches.
EN
CNS
CNT
KR
ID
TH
VN
9

Advertisement

loading

This manual is also suitable for:

Ekm3407rEkm3437w