Toyotomi REIKO Series User Manual page 73

DEHUMIDIFIER / AIR PURIFIER
Humidity display
After the unit starts running, it will automatically detect the indoor humidity, and
the digital display always shows current ambient humidity.
Humidity button
After pressing the humidity button set the required humidity for
dehumidifi cation operation. When the setting is completed, the panel returns
to the current humidity state.
(Setting method: circularly increase by 5% from 30%-80%, and adjust quickly
by holding on pressing humidity button.)
Note In the clothes drying and purifi cation modes, the set humidity cannot be
adjusted.
Mode button
Press the mode button , set current operation mode for the unit. There
are three modes for switching under the mode function.
Dry mode: When the icon « » is on, it means the unit enters the Dry mode.
When the clothes drying is completed, the humidity in the room will be
maintained within a certain range to prevent the clothes from becoming moldy.
NOTE Fan speed and humidity cannot be adjusted in Dry mode.
Dehu mode: When the icon « » is on, it means the unit enters the
dehumidifi cation mode. The unit will select a more comfortable humidity to
operate.
When the user has set the humidity, the unit will operate at the set humidity.
When the set humidity is reached, the compressor will stop running.
GB
73