Midea EGT 2.60 IX User Manual page 92

Step 2: installation of the panel
The wooden panel can be worked according to the installation drawings.
Semi-integratedmodel
Magical paster A and magical paster B be disjoinedon ,magical paster A on
the aesthetic wooden panel and felted magical paster B of the outer door of
dishwasher (see figure A). After positioning of the panel , fix the panel onto
the outer door by screws and bolts (See figure B).
Step 3: Adjusting the door spring tension
1. The door springs are adjusted at the
factory to the correct tension for the
outer door. If wooden panels are
installed, you must adjust the door
spring tension. Turn the adjusting
screw to use the adjuster to tension
or loosen the steel cable.
2. The door spring tension is correct if
the door remains horizontal in the
fully open position but folds up to
close with a light touch of the finger.
35