Midea EGT 2.60 IX User Manual page 65

Follow the steps below to add dishwasher salt:
1. Remove the lower basket and unscrew the container cap.
2. Fill the salt container with water to the maximum. It is normal for a small
amount of water to escape from the salt container.
3. Insert the end of the funnel (supplied) into the hole and add about
0.8 kg of dishwasher salt.
4. Screw the cap back on after filling the container.
5. The salt warning light goes out once the salt container has been filled with
salt.
6. Immediately after filling the salt into the salt container, a wash program
should be started (we recommend a short program). Otherwise, the
filter system, pump or other important parts of the appliance may be
damaged by the salt water. This is not covered by the warranty
NOTE:
• The salt container may only be refilled if the salt warning light ( ) in
the operating panel is illuminated. Depending on how well the salt
dissolves, the salt warning light may remain on even if the salt
container is full.
If there is no salt warning light on the operating panel (on some models),
you can estimate when to refill the salt in the softener based on the
number of wash cycles the dishwasher has run.
• If salt is spilled, run a soak or quick program to remove it.
8
.